Revo REVDN650-1 Instruction Manual

9 LENS ADJUSTMENT Field of view: Adjust setting from Telephoto (T) to wide (W) field of View. Focus: Adjust lens focus from near (N)

10 DC AUTO IRIS LENS 2.6-6mm 4-9mm 2.8~12mm 6-50mm Image Size 1/3´ CCD 1/3" CCD 1/3" CCD 1/3" CCD Focal Length 2.6-6.0mm 5% 4.0

11 CAMERA ADJUSTMENT <White Balance> 1) Auto(Auto White Balance) : AWB mode (1800ºK ~10500ºK) 2) Push/Hold : Push&Hold Mode. ¾ To find

12  If there is a high light installed in a limited environment such as an apartment parking garage or gas station entrance, removing

13 ¾ Absent : Press the Enter button to Absent detection mode. Detect object appeared or removed the scene  Sens Down : Adjust sensitivity of Abs

14 Crossing object is not considered. / Several objects will not be detected. If the distance is increases between the camera and entrance, the resul

15  Auto mode : When motion is not detected, output video is being refresh in configured interval. And when the motion is detected, output video i

16 A. Title B. Delete character C. Character table D. Command line - Clear : Clear Title - Cancel: Cancel editing - Accept: Save Title

17 Activate only AC power inputted. 5) White Pixel ¾ Det Exe : Press Enter button to turn White Pixel Compensation mode Start.  ENT to Adj : Pre

18 EXTERNAL DIMENSION Window Size 0.1 in. (2.5mm thick), impact-resistant P.C (LEXAN) 3.93 in. (10cm) diameter Cable Entry One 1" opening ho

19 SPECIFICATIONS MODEL NTSC PAL Power Power source DC 12V / AC 24V ± 10% Power consumption 4.5 Watts General Image sensor 1/3" Su

MEMO

50302586B

2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH V

3 FCC COMPLIANCE STATEMENT CE COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUN

4 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do

5 CONTENTS OF PACKAGE The package contains the following Camera in Housing ------------------------------------------------------------------1 Instru

6 INTRODUCTION The camera provided high-quality image using SONY Wide Dynamic 1/3´ CCD and digital signal processing LSIs. Features: ˍ 1/3´ Super-

7 CAMERA CONNECTIONS Connection Cable Description COLOR Description RED AC24V/DC12V WHITE AC24V/DC12V ORANGE ADKEY BROWN GND BLUE RS485(-) GREEN RS48

8 INSTALLATION 1. Loosen the four torx screws located midway up the front of the housing leave the screws intact in the front portion. (Fig. 1) 2. Dr